I get asked about my house colours all the time. Every week I think! So I thought I’d put a post together for those who are interested 🙂
The weatherboard has been painted SHALE GREY. I used Taubmans Endure (we painted the whole outside of the house ourselves). We asked Taubmans to tint the paint in full strength SHALE GREY. It doesn’t matter what brand you use, as long as it’s tinted ‘Colorbond Shale Grey’. I knew this paint colour would be good. I’d used it as a feature wall inside our previous home so I was confident the grey was the right grey. Not blue, not brown, not purple (you know how some throw the wrong tinge?). I also knew shale grey would be the right grey because it originated from Colorbond (used for a roofing) and I had seen this colour on houses in our area.
My roof colour is SURFMIST. It’s light (but not white). It’s a pale grey. I matched the gutters and fascia to this. So there was no hard thinking here. Sometimes people get so confused with roof/gutter/fascia. For me it’s easy – all the same. Now, the swatches I’ve put on the image above are small, so they may look darker, but outside over a large area, they do look lighter as you can see from the photos of my house.
The window frames, shutters, posts and fretwork are WHITE. No tint in that bucket of white. Nothing. Don’t get confused with whites. You don’t have to tint everything. This leads me to INSIDE my house. The walls are all WHITE. No tint. Just a wash and wear brand on the walls (with no tint added) will do, and the SAME white went straight on to the ceiling. My entire house has the same white paint from the bottom of the walls up and over the ceilings. It was Taubmans Easy Coat Walls. Now, if you did need to put a tint in your white (some painters will request something because they say the paint covers better), I would ask them to put a “shot” of black in that white tin. Like an incy bit just to keep the white balanced. But I don’t normally do that. I just like the whiteness which comes straight out of the tin. My internal doors, skirting and architraves are all GLOSS WHITE (again no tint).
So you can see that I picked THREE colours out the front – shale grey, surfmist and white. You can also see that the house looks darker in the shade and quite light in the sun.
The reason I know all of these colours work well is because this is the 3rd house we’ve built and we’ve renovated two houses as well (I’ve made some doozies along the way too!).
♥ KC.